Home > Support > Pyrotechnical Launcher Support > RG-3 Launcher Instructions
... < back 
RG-3 Insutructions

6 Shots, Cal. 6 mm (.22 Cal) - Hot Acorn Crimped Blank (Item # 6051) Cartridges ONLY

FUNCTIONING:
This launcher has a semi-automatic trigger cocking, clip advancing mechanism. AVOID PULLING THE TRIGGER WHEN THE CLIP IS EMPTY, EXCEPT WHEN THE SAFETY LEVER IS IN "E" (EJECT) POSITION.
LEVER POSITIONS: “E” EJECT, “S” SAFETY, “F” FIRE

LOADING:
Hot Acorn Crimped Blanks (Item # 6051) are required for this launcher. Remove the clip by setting the safety lever to "E"(Eject) position, and then pull the trigger repetitively to advance the clip to the rear. Open the rear door and remove the clip. Open the clip and insert the crimped blanks. Close the clip. Set the Safety Lever to “S”(safety); re-insert into the front, top of the launcher. (The clip is shaped so that it can only be smoothly re-inserted into the launcher in one manner). The clip will "click" into place when it is properly inserted.

FIRING: Dry Firing (with no blanks in the chamber) will permanently damage launcher.
Insert 15 mm pyrotechnical cartridge into the end of the muzzle as per instructions on pyrotechnic cartridge packaging, i.e. BLACK or HOLLOW end in first. Move the safety lever to the "F" (FIRE) position. You are now ready to fire a 15 mm pyrotechnical cartridge. Always fire at 45-degree angle from the ground. When all six crimped blanks are fired, it will be necessary to reload the clip.

CLEANING:
After each use clean crimped blank chamber, muzzle adaptor and barrel with a 6mm bore brush and water. Dry all parts thoroughly after cleaning. Proper maintenance will increase the efficiency and life of the launcher. NB It is extremely important, that launcher & clip be kept very clean, especially after heavy use as it is possible for flash of blank to be impeded by carbon build up and flash backwards, igniting all blanks in clip at once.

SAFETY INSTRUCTIONS:
• Operator must only fire this launcher in area clear of all personnel. Personnel should be a minimum of 5 meters behind launcher operator. Always fire at a 45-degree angle above the ground.
• Do not make any modifications to any components of this launcher.
• Never load or fire this launching device from a vehicle or vessel. Do not fire at humans, animals, buildings, and dry fields or at any flammable materials or liquids. Keep an adequate distance from all flammable objects.
• Always wear a hardhat, eye, and ear protection when using or handling this launching device.
• Never store launcher with crimped blanks or pyrotechnical cartridges inserted.
• This device is intended solely for the purpose of wildlife management and control. The proper and safe use of this device is the sole responsibility of the operator/owner. The seller assumes no responsibility or liability for the improper or illegal use, resale, physical injury or property damage resulting from the deliberate or accidental discharge, modifications to the device or cartridges, careless operation, and launcher maintenance neglect. The seller guarantees care in manufacture but assumes no further responsibility.
• Only mature, responsible adults who have a clear understanding of the functions of this device and a working knowledge of pyrotechnical scare cartridges and launchers should operate this tool. Persons under 18 years of age should not operate this device.
• Always keep this instructional sheet with the launcher.
• This launcher is not a firearm: it is a powder-actuated tool.
• Failure to comply with these safety instructions could result in serious injury or death.


IF UNCLEAR ON ANY OF THE ABOVE TOPICS, PLEASE CONTACT MARGO SUPPLIES LTD.
Phone: 403-652-1932 Fax: 403-652-3511 Email: info@margosupplies.com

Part Diagram

Diagram #

Ident. #

Description

 

Diagram #

Ident. #

Description

10

093505

Pistol Frame

 

130

093523

Spring Rod

20

215755

Handle Grip - Pair

 

140

093518

Compression Spring lg

40

093507

Cover

 

150

000019

Spring Washer

50

092627

Magazine Clip

 

160

093522

Trigger Spring Rod

60

093508

Rear Cover

 

170

093521

Trigger Spring

70

092618

Hammer

 

180

000022

Carrying Blade Spring

80

092617

Trigger

 

190

0056254

Compression Spring sm

90

093516

Carrying Blade

 

200

010201

Metal Ball

100

092615

Safety

 

210

093525

Roll Pin

110

347663

Holding Bolt

 

220

691000

Handle Grip Screw

120

000044

Safety Spring

 

230

332518

Muzzle



  .. < back
. home