More Information

7/8" CORNER/END BRACE ASSEMBLY
To maximize wire tension, this 7/8" diameter fibreglass post brace assembly comes complete with 72" upright and 60" diagonal posts and all necessary hardware. This brace system enables the wire to be installed guitar string tight so that it easily separates the hair and delivers the electric shock to the bear's hide.

3034 - 7/8" Corner/End Brace Assembly
$32.20 CDN

GALVANIZED STRANDED WIRE
This product has a breaking strength of 1000+ lbs. This is an important feature because a deterred, retreating bear must not be able to break the wire. This galvanized wire is rust resistant and will continue to be an excellent conductor of electricity for years even in permanent applications.

3015 - 500' (153m) Spool Galvanized Stranded Wire $33.00 CDN 3016 - 1,250' (381m) Spool Galvanized Stranded Wire $82.50 CDN	3017 - 2,500' (762m) Spool Galvanized Stranded Wire $165.00 CDN 3018 - 5,000' (1,524m) Spool Galvanized Stranded Wire $330.00 CDN
3020 – Winder/Spool (spool capacity is 500 m) $12.75 CDN

CRIMPING & CUTTING TOOLS
This tool comes complete with 100 aluminium oval sleeves and is used to make electrical connections.

3014B – 5/64"Aluminum Oval Sleeve (100/bag)
$9.42 CDN

3012A – American Cable Cutter
The American always makes a clean straight cut and will do so for years.
$37.50 CDN

3012B – American Swagger - for 5/64" ovals
$37.50 CDN

CABLE CLAMP
These clamps are used to connect wire strands and are resuable.

3025A – Cable Clamp (each)
$0.21 CDN

WIRE ROPE GRIP
Designed for quick tie offs and slicing of the stranded wire cable. These “grips” are reusable, do not require tools, and are the means of tensioning wire.

3022 - Wire Rope Grip
$3.25 CDN

QUICK CLIPS
These clips attach easily to the fibreglass posts to keep the wire at the desired height. Phillips screw driver required.

3058 - 7/8" Quick Clip
$0.75 CDN

FIBERGLASS LINE POSTS
These ½" x 60" line posts maintain the wire height integrity between corner assemblies. Recommended line post spacing is 15' to 20' depending on the terrain. Undulating, uneven ground requires closer spacing.

3029 - 1/2" x 60" Fiberglass Line Post
$3.30 CDN

SNAPMAX CLIPS
These ½" clips are used on the line posts and provide a quick and secure wire fastener. They are easily installed with a pair of ordinary pliers or by hand.

3055 - 1/2" Snapmax Clip
$0.35 CDN

HEAVY DUTY NAIL-ON INSULATOR
This two-nail insulator has adequate water run-off space and a heavy flange to prevent shorting to wet posts.

3036 – Nail-On Insulators 25/Bag
$6.00 CDN

3019 – Pounder and Puller
$75.00 CDN

3019A – Post Pounder
$45.00 CDN

GROUNDING PRODUCTS

3048 – Ground Rod 3/4" x 6'
$14.00 CDN

3049 – Ground Plate
$14.00 CDN

3050 – Ground Clamp
The most common failure of electric fencing is poor connection at the ground rod. This 3/8" single bolt bronze clamp guarantees proper connection. Used with #3048 or #3049.
$4.75 CDN

GATE HANDLES
This spring gate handle has an extra heavy hook and lots of hand grip.

3021 - Gate Handle
$1.85 CDN

SLINKY GATE
Stretches to fit gate opening up to 20 feet. Retracts to keep gate off ground when open. Electrified when closed, neutral when open. Highly visible and effective, complete with schematic and instructions.

3021A - Slinky Gate
$19.70 CDN

HOOK-UP WIRE
This double insulated 14 gauge hook-up wire is available in 50 foot rolls.

3051 – Hook-Up Wire 14 Ga. (50' Roll)
$17.50 CDN

ELECTRIC FENCE WARNING SIGNS
These signs are made of highly visible, bright yellow vinyl with bold black lettering. There are corner holes for wiring to fence or nailing to post.

3032 – Regular Sign
$1.55 CDN

3033 – Large Sign
$12.00 CDN

DIGITAL ELECTRIC FENCE TESTER
Suitable for measuring between 100volts and 9900volts.

3009 - Digital Electric Fence Tester
$89.95 CDN