Home > Electric Fencing > Electric Fencing Supplies > Hi-Tensile Fencing Products

... < back
Hi-Tensile Fencing Products

PIN LOCK WOOD POST INSULATOR
This black, high density polypropylene insulator performs in all climates. The attached pin locks and unlocks fence wire for ease of installation and enables the wire to be dropped readily. Its heavy duty construction withstands the pressure of hi-tensile fencing.

3038 – Pin Lock Insulators 25/Bag
$9.50 CDN


WIRE TIGHTENER
This heavy duty zinc plated metal strainer performs in all weather conditions. It
is installed without splicing wire. An economical strainer tool is also available.

3039 – Tightener
$4.00 CDN

WIRE STRAINER TOOL

3040 - Wire Strainer Tool
$9.00 CDN


WRAP AROUND INSULATOR
Unit consists of 19" poly tubing and a 19 1/2" galvanized steel strip. Flat side
of tubing fits tight against a post. Ideal for tying off at fence ends.

3041 - Wrap Around Insulator
$1.25 CDN


GRIPPLE
Joins, secures and tightens wire in seconds. Easy to use. Saves time and effort and is reusable. Use #3032A to tighten.

3023 - Gripple
$1.75 CDN


TENSULATOR
The Tensulator is a 4-in-one device that joins, tensions, anchors and insulates electric fencing. This system installs four times faster than traditional methods, is easy to use, can be tensioned and re-tensioned and is made from non-corrosive components for insulation and longer life. Once installed it maximizes the life of the wire by retaining its tension, insulates the wires from each other and acts as an anchoring device to the end post.

Tensulator (Pack of 10)
Comming Soon

TENSIONING TOOL
Tensioning tool for use with Gripples (#3023), Tensulators, and Wire Rope Grips (#3022). Easier tensioning up to 400kg (800lbs) with 6:1 gear drive and mechanical advantage. Lightweight (only 750g), ergonomic, compact and easy to carry. Durable, made from hardened steel and engineering grade polymer.

3023A – Gripple Tightening Tool
$97.50 CDN


CABLE CLAMP
These clamps are used to connect wire strands and are resuable.

3025A – Cable Clamp (each)
$0.21 CDN


NICOPRESS WIRE TAP
Not a splice. Used to make all electrical positive and negative connections.

3024 – Nicrpress Wire Taps 100/Box
$48.50 CDN


NICROPRESS CRIMPING TOOL
Multi-groove hand tool for pressing sleeves and line taps.

3024A - Crimping Tool
$49.95 CDN

 



LIGHTNING CHOKE
Protects your charger from high voltage damage during electrical storms.

3047 - Lightning Choke
$24.50 CDN


GROUNDING PRODUCTS

3048 – Ground Rod 3/4" x 6'
$14.00 CDN

3049 – Ground Plate
$14.00 CDN

3050 – Ground Clamp
The most common failure of electric fencing is poor connection at the ground rod. This 3/8" single bolt bronze clamp guarantees proper connection. Used with #3048 or #3049.
$4.75 CDN


UNDERGROUND HOOK-UP WIRE
This double insulated, polypropylene covered 12.5 gauge wire is available in 165' rolls. It has many uses: under driveways, gate entrances or to insulate one wire from another.

3052 – Hook-Up Wire 12.5 ga. (165' Roll)
$58.00 CDN


PORTABLE FIBERGLASS FENCE POSTS
These lightweight and highly flexible fibreglass rods are a quick, easy and economical solution to your temporary fencing or strip grazing needs. These fibreglass rods are made of continuous glass filaments and durable resin with sun guard ultraviolet protective coating.

3030A – 11/16" x 48"
$6.75 CDN


3030 – 11/16" x 60"
$8.00 CDN

3030F – 11/16" x 72" Drilled
$9.40 CDN

3030C – 11/16" x 96"
$11.75 CDN

3031 – 7/8" x 60"
$10.95 CDN

3031B – 7/8" x 72"
$13.85 CDN

3076 - 7/8" x 72" Rise Dip Post w/adapter
$24.60 CDN

ELECTRIC FENCE WARNING SIGNS
These signs are made of highly visible, bright yellow vinyl with bold black lettering. There are corner holes for wiring to fence or nailing to post.

3032 – Regular Sign
$1.55 CDN

3033 – Large Sign
$12.00 CDN


DIGITAL FENCE TESTER
Suitable for measuring between 100volts and 9900volts.

3009 - Digitial Fence Tester
$89.95 CDN

  .. < back
. home