... < back
U-Build Electric Bear Fence Components

Choose from the following
FENCE CHARGERS:

7/8" CORNER/END BRACE ASSEMBLY
To maximize wire tension, this 7/8" diameter fibreglass post brace assembly comes complete with 72" upright and 60" diagonal posts and all necessary hardware. This brace system enables the wire to be installed guitar string tight so that it easily separates the hair and delivers the electric shock to the bear's hide.

#3034 - 7/8" Corner/End Brace Assembly
$36.25 CAD

11/16" CORNER/END BRACE ASSEMBLY
To maximize wire tension, this 11/16" diameter fibreglass post brace assembly comes complete with 60"" upright and 48" diagonal posts and all necessary hardware. This brace system enables the wire to be installed guitar string tight so that it easily separates the hair and delivers the electric shock to the bear's hide.

#3030E - 11/16" Corner/End Brace Assembly
$18.00 CAD


PORTABLE FIBERGLASS FENCE POSTS
These lightweight and highly flexible fibreglass rods are a quick, easy and economical solution to your temporary fencing or strip grazing needs. These fibreglass rods are made of continuous glass filaments and durable resin with sun guard ultraviolet protective coating. Recommended line post spacing is 15' to 20' depending on the terrain. Undulating, uneven ground requires closer spacing.

Line Posts
#3029 - 1/2" x 60" Fiberglass Line Post
$3.90 CAD

#3026 – 3/8" x 48"
$1.95 CAD

#3027 – 3/8" x 60"
$2.45 CAD

Single Un-Braced Corner/Gate Posts
#3030A – 11/16" x 48"
$5.75 CAD

#3030 – 11/16" x 60"
$7.85 CAD

#3030F – 11/16" x 72" Drilled
$9.00 CAD


2" U-CLIP
For use with drilled fibreglass posts. Clip slides onto holes drilled in post and holds wire in position. They reusable are easily installed with a pair of ordinary pliers or by hand.

#3069 - 2" U-Clip
$0.26 CAD


SNAPMAX SPRING CLIP
A galvanized wire clip for use with fibreglass posts. Clip slides onto post and stays in position. They are easily installed with a pair of ordinary pliers or by hand.

#3055 - 1/2" Snapmax Clip
$0.40 CAD

#3054 – For 3/8" Line Post
$0.30 CAD

#3056 – For 11/16" Corner/Gate Post
$0.60 CAD


HEAVY DUTY NAIL-ON INSULATOR
This two-nail insulator has adequate water run-off space and a heavy flange to prevent shorting to wet posts.

#3036 – Nail-On Insulators 25/Bag
$6.25 CAD


DARE SPIN-ON INSULATORS
These screw tight insulators can be adjusted to height while current is on. There is generous water run-off space and insulators will fit 1/4" to 9/16" round posts.

#3037 – Spin-On Insulators 25/Bag
$6.00 CAD

DARE SUCKER ROD INSULATORS
Holds wire or polytape up to 1½" wide. These spin-on insulators can be adjusted to any height while current is on. Prime high density polyethylene with UV inhibitor. There is generous water run-off space and insulators will fit 1/4" to 7/8" round posts. No tools required.

#3037A – Sucker Rod Insulators 25/Bag
$15.00 CAD

BAYGARD PORTABLE ELECTRIC FENCE WIRE
Baygard is a patented lightweight and portable electric fence wire. It is easy to use, making it ideal for a number of temporary applications, including pasture management and rotational grazing.

#3010– Fence Wire 100m Roll
$14.25 CAD

#3010A– Fence Wire 200m Roll
$28.50 CAD

#3010B – Fence Wire 400m Roll
$52.95 CAD

#3010C – Fence Wire 800m Roll
$105.50 CAD

BAYGARD PLATINUM HIGH VISIBILITY EQUI-TAPE
Ideal for deer! Five strands of high conductive aluminum wire, and multi strands of light reflective, heavy-duty reinforced fiberglass cords. Silver metallic high reflective color reflects light for superior visibility. Will not sag on fence in hot weather and does not require tensioners.

NEW – 1/2" Platinum Equi-Tape 200m (656 ft)


BAYGARD HIGH VISIBILITY FENCE TAPE
Baygard HV is a wide electric fence tape providing high visibililty and excellent conductivity - ideal for hard to control animals such as horses and sheep. Also proven effective on bears and other predators. This premium performance wire is ideal for strip or rotational grazing, creating temporary pastures, old fence rehabilitation and wildlife control.

#3010D – Fence Tape 100m Roll
$27.75 CAD

#3010E – Fence Tape 200m Roll
$66.15 CAD

#3014A – Pulse Connectors
$3.50 CAD


GALVANIZED STRANDED WIRE
This product has a breaking strength of 1000+ lbs. This is an important feature because a deterred, retreating bear must not be able to break the wire. This galvanized wire is rust resistant and will continue to be an excellent conductor of electricity for years even in permanent applications.

#3015 - 500' (153m) Spool
Galvanized Stranded Wire
$33.00 CAD

#3016 - 1,250' (381m) Spool
Galvanized Stranded Wire
$82.50 CAD

#3017 - 2,500' (762m) Spool
Galvanized Stranded Wire
$165.00 CAD

#3018 - 5,000' (1,524m) Spool
Galvanized Stranded Wire
$330.00
CAD


#3020 Winder/Spool


#3020A Winder/Spool

WIRE WINDER SPOOLS
Standard wire winder spool with handle. Spool capacity is approximately 300m when using stranded galvanized wire and 500m when using Baygard wire.

#3020 – Winder/Spool (spool capacity is 300 m)
$16.00 CAD


Heavy duty Reel Easy™
wire winding system. Unique patented snap on/off handle turns every Reel Easy Cartridge into a light weight, portable reel for dispensing or rewinding wire. The handle features rugged metal construction and durable plastic cartridge.
Spool capacity is 500 m when using stranded galvanized wire, and 800 m when using Baygard wire).

#3020A – Heavy Duty Reel Easy Winder/Spool (Includes Handle)
$69.95 CAD

#3020B – Heavy Duty Reel Easy Spool Only
$9.75 CAD

 

CRIMPING & CUTTING TOOLS
This tool comes complete with 100 aluminium oval sleeves and is used to make electrical connections.

#3011 – American Cable Cutter
The American always makes a clean straight cut and will do so for years.
$37.50 CAD

#3012 – American Swagger - for 5/64" ovals
$37.50 CAD

#3013 – 5/64"Aluminum Oval Sleeve (100/bag)
$9.40 CAD


CABLE CLAMP
These clamps are used to connect wire strands and are resuable.

#3025A – Cable Clamp (each)
$0.20 CAD


SPLIT BOLT
These stainless steel split bolts are used to connect wire strands and are resuable.

#3025B – Split Bolt (each)
$1.90 CAD

WIRE ROPE GRIP
Designed for quick tie offs and slicing of the stranded wire cable. These “grips” are reusable, do not require tools, and are the means of tensioning wire.

#3022 - Wire Rope Grip
$3.25 CAD

WIRE TIGHTENER
This heavy duty zinc plated metal strainer performs in all weather conditions. It
is installed without splicing wire. An economical strainer tool is also available.

#3039 – Tightener
$4.00 CAD

WIRE STRAINER TOOL

#3040 - Wire Strainer Tool
$17.50
CAD

HOOK-UP WIRE
This double insulated 14 gauge hook-up wire is available in 50 foot rolls.

#3051 – Hook-Up Wire 14 Ga. (50' Roll)
$17.50 CAD


FIBERGLASS FENCE POST POUNDER/PULLER
This 18 lb. manual post pounder makes placing fibreglass fence posts quick and easy. The puller is a great addition to the post pounder that makes for quick removal of portable fibreglass fence posts.

#3019 – Pounder and Puller
$95.00 CAD


FIBERGLASS FENCE POST POUNDER
This 18 lb. manual post pounder makes placing fibreglass fence posts quick and easy.

#3019A – Post Pounder
$59.00 CAD

GROUNDING PRODUCTS
Proper grounding is essential for an effective fence. Ground rods are the most common way to ground an electric fence. Choose from a standard 3/4" diameter or a "quick" 1/2" diameter ground rod. The 1/2" quick ground rod has a built-in pounder. Ground plates are often used where terrain makes it difficult or impossible to drive in a ground rod. For better grounding extra ground rods and/or plates may be added.

#3048 – Ground Rod 3/4" x 6'
$14.00 CAD

#3048A – Quick Ground Rod 1/2" x 30"
$15.00 CAD

#3049 – Ground Plate
$16.00 CAD

Ground Clamps
The most common failure of electric fencing is poor connection at the ground rod. These single bolt bronze clamps guarantee proper connection.
#3050 – 3/4" Ground Clamp (used with #3048 or #3049)
$4.90 CAD

#3050A – 1/2" Ground Clamp (used with #3048A)
$2.95 CAD

GATE HANDLES
This spring gate handle has an extra heavy hook and lots of hand grip.

#3021 - Gate Handle
$2.75 CAD

RUB'R GATE HANDLES
RUB’RGATE soft pliable rubber outer case internally reinforced with semi-rigid, non-conductive vinyl inner tube. This provides a firm grip and acts as an extra layer of insulation. Generous, sensibly spaced flanges allow plenty of hand room. Large, heavy stamped steel plated safety hook. Enclosed spring stretches 3½” to keep wire taut.

#3021D - RUB'R Gate Handle
$2.95 CAD

OLD IRON SIDES GATE HANDLES
Safety hook and body formed as one from 7/8” diameter steel pipe. Spring mechanism consists of 41/4” long compression spring fastened to a 5/16” diameter eyebolt. All metal parts permanently assembled using 20 tons of force. No flimsy snap-on/push-on fasteners used anywhere. Large insulating grip measures 5 1/8” long with a 2 1/4” diameter flange for extra shock protection. Molded of a soft flexible material that will not chip, crack or break when abused. Performs in any climate. Metal parts plated to resist rust. Molded grip contains carbon black to deter UV rays. The heaviest, toughest DARE electric fence gate handle ever.

#3021C - Gate Handle
$4.95 CAD

SLINKY GATE
Stretches to fit gate opening up to 20 feet. Retracts to keep gate off ground when open. Electrified when closed, neutral when open. Highly visible and effective, complete with schematic and instructions.

#3021A - Slinky Gate
$18.25 CAD

ELECTRIC FENCE WARNING SIGNS
These signs are made of highly visible, bright yellow vinyl with bold black lettering. There are corner holes for wiring to fence or nailing to post.

#3032 – Regular Sign
$1.55 CAD

 


DIGITAL ELECTRIC FENCE TESTER
Suitable for measuring between 100volts and 9900volts.

#3009 - Digital Electric Fence Tester
$90.00 CAD

ANALOGUE ELECTRIC FENCE TESTER
Professional analogue electric fence tester. Premium quality for electric fences and energizers including low impedance models. Easy to read display, no battery required. Bonus! Storage pouch included.

#3009A - Analogue Electric Fence Tester
$85.00 CAD

FIVE O-LITE ELECTRIC FENCE TESTER
Standard 5 Light Fence Tester, for use with fence energizers with peak voltage of up to 5000 V. Lights glow in sequence to indicate approximate voltage. 1000V to 5000V readings

#3008 - Five O-Lite Electric Fence Tester
$15.00 CAD

HELIX ANCHOR
Galvanized screw-in helix anchor (4" x 24") 5/8" shaft. Pull out strength is 4,000 lbs. Used to tie back corner braces in difficult ground (rocky/gravel soil).

#3033 - Helix Anchor
$18.50 CAD

SMALL POST BAG
Used to transport or storge line posts, corner posts or ground rods. Ideal for the ultra portable system. Made from durable canvas and measures 61" x 7" x 6".

#3030G - Small Post Bag
$25.00 CAD

LARGE POST BAG
Used to transport or storge line posts, corner posts or ground rods. Ideal for the heavy duty portable system. Made from durable canvas and measures 73" x 7" x 6".

#3035C - Large Post Bag
$25.00 CAD

TOTE BOX
Used to transport fencing material, this super tough tote box measures 24" x 16" x 16.5".

#3035B -Tote Box
$15.00 CAD

ANIMAL ELECTRIC FENCE ALERT ALARM SYSTEM
Maximize the effectiveness your existing electric fence. The alarm system is activated when the bear touches the hot wire. The bear receives a shock which causes a short on the fence wire, simultaneously tripping the siren. The audio stimulation frightens the bear and, more importantly, alerts camp personnel of the bear’s presence. This system comes complete with alarm control box, siren, and 12-volt dry cell battery (battery will provide 50hrs of continuous siren operation). It can be rigged with any alarm device (ie. lights, security monitors, etc.) that is triggered by a switch closure. Also ideal for monitoring the perimeter of game (deer/elk) fencing.

#4001 - Animal Electric Fence Alert Alarm System

$235.00 CAD

#4001A - Animal Electric Fence Alert Alarm System In Weather Resistant Dry Box
$269.75 CAD


#4007- Replacement 12V Dry Cell Battery
$27.50 CAD

#6065 - Dry Box Only
$19.75 CAD

  .. < back
. home